• Method: Drop test
• Scale: 1 drop = 10 ppm CaCO3
• Number of tests: 72 (with the reagents supplied with the kit)

Components

• 1 x A (20ml / bottle)
• 1 x B (20ml / bottle)
• 1 x Plastic sample tube, 20 mL

Instructions for Use:

1.  Rinse the cylinder with the water to be analyzed, then fill it up to the mark (15 ml)
2. Add 5 drops of solution A and shake. If the water turns blue, it corresponds to a hardness <1ºHF. (There is no lime or hardness in the water)
3. If the water sample turns purple-red then add solution B drop by drop, stirring at all times, until the colour of the sample changes to blue. Count the number of drops added
4. Each drop of Solution B added is equivalent to 1ºHF (1 degree French or 10 mg/L or 10ppm of CaCO3)
5. Multiply the number of drops used in Step 3 with 10 mg/L. Suppose you added 15 drops of Solution B, then the amount of water hardness would be 15 x 10 mg/L= 150 mg/LTest kit for the analysis of total hardness
   • Method: Drop test
   • Scale: 1 drop = 10 ppm CaCO3
   • Number of tests: 72 (with the reagents supplied with the kit)

The post Water Hardness Analyzer Kit appeared first on One Eight Filtration Dynamics.

A full test will check for E Coli, Total Coliforms, TBC, Aluminium, Iron, Manganese, Ammonia, Nitrite, pH, Colour, Conductivity, Hardness and Turbidity.

All you need to do is take your water sample properly and return it to us.

Once we receive test results, we will go through the report and recommend the best water treatment option suitable for your application.

Please contact the office on 067 53886 for further information

The post Full Water Test appeared first on One Eight Filtration Dynamics.

Drinking water from private wells is at risk of contamination as the wells are not regulated. It is therefore recommended to get your private well tested once a year to ensure the water you’re drinking is free from any harmful bacteria.

All you need to do is take your water sample properly and return it to us.

When we receive the test results, and if any contaminant is found in your sample, we’ll suggest the best water treatment option suitable for your application.

Please contact the office on 067 53886 for more information

The post Bacteria Test appeared first on One Eight Filtration Dynamics.