The W22 motors are essential when it comes to energy saving. With superior efficiency levels, they reduce energy consumption, offer excellent cost effectiveness, and consequently greater productivity and lower costs for the industry.

The motors have high efficiency and comply with the efficiency level according to IEC 60034-30-1

The post WEG W22 PREMIUM Second Hand appeared first on One Eight Filtration Dynamics.

The post ES2 CIRCULATING PUMPS appeared first on One Eight Filtration Dynamics.

With the KGE kit, the suction of the Pedrollo TOP MULTI-EVO pump occurs at about 10 centimeters below the surface of the water, preventing the suction of floating residues or sediments deposited on the bottom of the tank, avoiding damage to the electric pump.

The kit consists of a 30 mm PVC spiral hose 1.5 meters long, a stainless steel suction filter, a spherical polyethylene float and 30mm hose connectors

The submersible pump is sometimes called a bell pump and is fully immersed in water to be extracted. These pumps are used in situations that involve flooding, such as rising groundwater in cellars or basements, flooded boats, or flooded areas

Submersible pumps can be used in:

• Well or borehole pumping
• Site drainage
• Water transfer
• Flood protection
• Wastewater removal
• Water features for ponds

Contact One Eight Filtration today.

The post Floating Suction Kit- Pedrollo KGE appeared first on One Eight Filtration Dynamics.

Want to learn more about our Pedrollo Pedrollo Top Multi 2 (c/w Float). TOP MULTI are centrifugal multistage submersible pumps featuring closed impellers with a particular application for pumping from wells and water boosting from tanks. Part of the Pedrollo range. Two specifications are available MULTI Standard for manual operation and MULTI TECH which features a built in automatic electronic controller providing water on demand.

All MULTI models feature excellent motor cooling performance due to the jacketed motor design enabling the pump to operate continuously partially submerged. Other innovative features include double mechanical seals with intermediate oil chamber for total motor sealing and simple design for ease of maintenance. Pump construction is fiberglass reinforced techno plastic body and suction filter with Noryl impellers and diffusers. All pumps are fitted with a low level control float switch and 10m cable as standard.

 Features of Pedrollo Top Multi 2 (c/w Float)  are as follows;

• Pump starts on pressure (below 1.5Bar) and stops on flow (<2l/min).
• Protects against dry run with auto restart. The controller automatically attempts to restart the pump at intervals of 15, 30 and 60mins for a maximum of 24hrs.
• Protection against cycling. After 30mins of repeated cycling (intervals of <2mins) the controller switches off the pump for 30mins after which restart occurs. Fitting a small pressure tank on the delivery line pre-charged to 1.2Bar is recommended to reduce cycle times. Static head should be <10m or pump will not start.
• Protection against seizing. The controller automatically runs the pump for 10secs after 48hrs of pump inactivity.

MOTOR
Pumps are provided with built-in non-overloading induction motors designed for continuous operation. A thermal cut-out is provided in the motor windings to protect against pump overload and the pump can be connected directly to the mains power supply through a 10amps fuse or MCB

Submersible pumps can be used in:

• Well or borehole pumping
• Site drainage
• Water transfer
• Flood protection
• Wastewater removal
• Water features for ponds

The post Pedrollo Top Multi 2 (c/w Float) appeared first on One Eight Filtration Dynamics.

Pedrollo Top Multi 1 Drainage Pump are centrifugal multistage submersible pumps featuring closed impellers with a particular application for pumping from wells and water boosting from tanks. Two specifications are available MULTI Standard for manual operation and MULTI TECH which features a built in automatic electronic controller providing water on demand.

All MULTI models feature excellent motor cooling performance due to the jacketed motor design enabling the pump to operate continuously partially submerged. Other innovative features include double mechanical seals with intermediate oil chamber for total motor sealing and simple design for ease of maintenance. Pump construction is fiberglass reinforced techno plastic body and suction filter with Noryl impellers and diffusers. All pumps are fitted with a low level control float switch and 10m cable as standard.

Particular features of Pedrollo Top Multi 1 Drainage Pump are as follows

• Pump starts on pressure (below 1.5Bar) and stops on flow (<2l/min).
• Protects against dry run with auto restart. The controller automatically attempts to restart the pump at intervals of 15, 30 and 60mins for a maximum of 24hrs.
• Protection against cycling. After 30mins of repeated cycling (intervals of <2mins) the controller switches off the pump for 30mins after which restart occurs. Fitting a small pressure tank on the delivery line pre-charged to 1.2Bar is recommended to reduce cycle times. Static head should be <10m or pump will not start.
• Protection against seizing. The controller automatically runs the pump for 10secs after 48hrs of pump inactivity.

MOTOR
Pumps are provided with built-in non-overloading induction motors designed for continuous operation. A thermal cut-out is provided in the motor windings to protect against pump overload and the pump can be connected directly to the mains power supply through a 10amps fuse or MCB

Submersible pumps can be used in:

• Well or borehole pumping
• Site drainage
• Water transfer
• Flood protection
• Wastewater removal
• Water features for ponds

The post Pedrollo Top Multi 1 Drainage Pump appeared first on One Eight Filtration Dynamics.

At One Eight Filtration we sell our Submersible Pumps with Float Switch.

Submersible pumps or sump pumps are great for pumping groundwater, seepage or rainfall, and are recommended for flood defence schemes. Submersible pumps can be effectively used in construction or site drainage enabling contractors to continue working in wet weather.

Advantage of the Submersible Pumps

The main advantage of submersible pumps is that they generally do not require priming as they are already submerged in the water. The submersible pumps are also electric, so they can be used internally or externally .

Submersible pumps can be used in:

• Well or borehole pumping
• Site drainage
• Water transfer
• Flood protection
• Wastewater removal
• Water features for ponds

If you are interested in our Submersible Pumps with Float Switch contact us today

The post Submersible Pumps with Float Switch appeared first on One Eight Filtration Dynamics.