Commercial & Domestic pH Correction Systems | Acidic Water Treatment

A pH imbalance in your water supply means your water has drifted away from ideal baseline parameters, making it either too acidic or too alkaline.

The standard pH scale ranges from 0 (highly acidic) to 14 (highly alkaline), where a pH value of 7 indicates perfectly neutral water. While surface water typically ranges between 6.5 and 8.5, and groundwater naturally sits between 6.0 and 8.5, these numbers fluctuate aggressively due to local environmental factors, heavy rainfall run-off, and geological shifts.

At One Eight Filtration Dynamics, we design, install, and service advanced pH correction systems that restore chemical neutrality to your water network, permanently preventing structural pipework corrosion and eradicating frustrating blue-green stains from your plumbing fixtures.

The Hazards of Acidic Water (Low pH)

When water drops below a pH of 6.5, it becomes aggressively corrosive. Acidic water acts like a solvent, silently attacking your property’s infrastructure and leaching heavy metals directly into your drinking supply.

Left untreated, low pH levels in your water will:

• Corrode Plumbing & Infrastructure: Actively eats away at metal copper pipes, hot water cylinders, household fittings, and commercial boiler elements, leading to pinhole leaks and expensive mechanical failures.

• Leave Heavy Stains: Reacts with copper and brass fittings to leave highly stubborn blue-green stains across your sinks, showers, toilets, and drains, or orange-red streaks if heavy iron is present.

• Ruined Hair Texture: The high copper content leached by acidic water binds to keratin, drying out your scalp and physically turning blonde or light-coloured hair green.

• Impart Foul Tastes: Gives your daily drinking water a sharp, bitter, sour, or heavily metallic taste.

• Risk Heavy Metal Pollution: Excessively low pH causes heavy metals like copper, lead, iron, zinc, and manganese to dissolve into the water stream at concentration levels that pose a severe risk to long-term human health.

⚠️ Alkaline Water Spikes (High pH)

Conversely, water with a very high pH (above 8.5) is overly basic. This high alkalinity imparts a distinctly bitter, soapy taste, creates an unpleasant smell, and causes rapid, dense mineral scaling across your commercial or domestic heating elements.

[Acidic Intake (pH <6.5)] ➔ [One Eight Limestone Neutraliser Bed] ➔ [Balanced, Safe Water (pH 7.2)]

Our Engineered pH Water Solutions

How do you permanently correct and stabilise the pH level of your drinking water? The most reliable and economical method is the integration of an automated, sacrificial media filtration system.

Automated Limestone Neutralising Systems

Our specialised treatment units employ a premium, all-natural neutralising media composed entirely of pure limestone (calcium carbonate).

When your acidic raw water passes through the pressure vessel, it slowly and naturally dissolves the limestone media. This chemical reaction safely self-limits: it buffers the water by raising the alkalinity just enough to establish a stable, neutral plateau. This completely neutralises the acid, stops copper leaching, and guarantees crystal-clear, safe water.

As the limestone media naturally dissolves while safeguarding your pipes, it simply requires a straightforward, periodic top-up by a One Eight service technician to ensure continuous, lifelong protection.

Secure Your Plumbing and Health Today

Do not allow aggressive, acidic water to erode your capital plumbing investments or leach heavy metals into your family’s drinking glasses. Speak directly with Ireland’s premier water balancing and filtration experts to specify the perfect system for your property.

• Speak with a pH Correction Engineer: 067 53 886

• Email for a Free System Sizing Quote: info@oneeight.ie

• Book an On-Site Water Analysis Survey: [Contact One Eight Today]