A3. Anthracite Azure 250 softener

840.00

Anthracite Azure 250 softener

With up-flow proportional brining, a high flow rate is of up to 3 m³ of water per hour, and a large salt capacity. These softeners provide low salt consumption, easy maintenance, and efficiency. A full tank of salt is enough for a 15-month* run before the next salt refill.

KEY FEATURES

  • Reliable US-made Clack® DV valve with diamond-carbon coating
  • Increased salt capacity: up to 130 kg
  • Up-flow proportional regeneration for smart consumption
  • Effective salt consumption: up to 80 grams per liter of resin or less
  • Water-saving: 100 liters for regeneration
Brand :
Category:

Description

Anthracite Azure 250 softener

With up-flow proportional brining, a high flow rate is of up to 3 m³ of water per hour, and a large salt capacity. These softeners provide low salt consumption, easy maintenance, and efficiency. A full tank of salt is enough for a 15-month* run before the next salt refill.

KEY FEATURES

  • Reliable US-made Clack® DV valve with diamond-carbon coating
  • Increased salt capacity: up to 130 kg
  • Up-flow proportional regeneration for smart consumption
  • Effective salt consumption: up to 80 grams per liter of resin or less
  • Water-saving: 100 liters for regeneration

SPECIFICATION

Components:

  1. Pre-adjusted Clack DV
  2. Cabinet enclosure
  3. Pressure tank
  4. Brine well with safety float valve

Technical specifications

  • Flow rate:

Operating — 2.0 m³/h

Maximum — 2.5 m³/h

  • Quantity of DOWEX® HCR-S/S — 25 L
  • Volume capacity* — 5 m³
  • Usage of salt per regeneration** — 2.5–4.0 kg
  • Usage of water per regeneration — 0.25 m³
  • Duration of regeneration — 80–110 minutes
  • Pressure drop in service mode — 0.5 bar
  • Inlet pressure — 2–6 bar
  • Electrical requirements — 230 V, 50 Hz
  • Power consumption — 30 W
  • Inlet/outlet pipe connections — 1’’

*for hardness (250 mg/L CaCO₃)

**it is recommended to use Ecosil pelletized salt for regeneration

Feed water requirements

  • Hardness — 15 meq/L (750 mg/L CaCO₃)
  • Iron — 0.2 mg/L
  • Manganese — 0.05 mg/L
  • Chemical oxygen demand — 5 mgO₂/L
  • Required level of purification of sediment particles — 100 μm
  • Initial water temperature — +4…+30 °С